<sup id="l8d1b"></sup>
      <dl id="l8d1b"></dl>
            <em id="l8d1b"><ol id="l8d1b"></ol></em>

             

            河北屹洋管道設備有限公司

            HE BEI WPHY CO.,LTD

             
            PRODUCT INFO
            ELBOWS
            BIG BEND

            TEES

            &

            STONES

            PIPES

            FLAGES

            &
            BLIND

             

            CAPS
            CON/ECC REDUCERS
            ROCKCRYSTAL CARBON STREEL PIPEFITTING CSPIPEFITTING CARBON STREEL PIPEFITTING ROCKCRYSTAL
             
             
            PRINT】 【BACK
             

            WN FLANGES

            1/2"--72"

            DN15--DN1800

            CARBON STEEL FLANGES

            1/2"--72"

            DN15--DN1800

            SO FLANGES

            1/2"--72"

            DN15--DN1800

            SOCKET FLANGES

            1/2"--72"

            DN15--DN1800

            DIN ELBOWS

            1/2"--72"

            DN15--DN1800

            JIK FLANGES

            1/2"--72"

            DN15--DN1800

            THREADED FLANGES

            1/2"--72"

            DN15--DN1800 

             

            BS ELBOWS

            1/2"--72"

            DN15--DN1800

            LAP JOINT FLANGES

            1/2"--72"

            DN15--DN1800 

            FF FLANGES

            1/2"--72"

            DN15--DN1800

            8-BLINDS FLANGES

            1/2"--72"

            DN15--DN1800

            BLINDS FLANGES

            1/2"--72"

            DN15--DN1800

            Flange is a discoid parts, in the pipeline project, the most common use of the flange are paired. In the pipeline project, mainly used for pipeline flange connection. The need to connect the pipeline, installed a variety of flange, low-pressure pipelines can use silk to flange, four kilograms more than the pressure of the use of welding flange. Between the two flange with sealed, then bolts fastening. The pressure flange have different thickness and use a different bolt. Pumps and valves, and pipes connect, these local equipment, but also made corresponding to the flange shape, also known as the flange connection. All in two plane surrounding the use of bolts in the connector link at the same time closed the parts are generally referred to as "flange", such as ventilation pipe connections, the parts can be called "flange parts." But this connection is only a partial equipment such as pumps and the flange connection, not the pump is "flange parts." Such as the relatively small valves, etc., can be called "flange parts."
            Flange connecting the construction of the pipeline is an important connection.

            Flange is connected to two pipes, fittings or equipment, to their respective fixed in a flange on the flange between the two, together with flange pad, together with bolts fastening to complete the connection. Some of the pieces of equipment have been built and the flange, is a flange connection.

            The flange connecting thread (silk T) flange and welding flange. Low-voltage wire to a small-diameter flange, high pressure and low pressure are the use of large diameter welded flange, different pressure the thickness of the flange and bolt diameter and the number is different.

            According to the pressure on different levels, the flange pad have different materials, asbestos from the low-pressure pads, high-pressure pad to asbestos have metal pad.

            Flange connection easy to use, able to withstand greater pressure.

            In the industrial pipeline, the flange connected to the use of a very wide range. Within the family, small diameter pipeline, but is low pressure, invisible flange connection. If the boiler room or a production site, are everywhere flange connection of pipelines and equipment.

            GB flange as follows: type implementation of the standards Nominal pressure (mpa) the diameter (mm) A material applied temperature flange JB/T4701-2000JB4726-2000JB4728-20000.25MPa-1.6MPaDN300-DN2000Q235-A, B, C2016MnR> -20 ° -200 °> -20 ° -350 ° B flange JB/T4702-2000JB4726-2000JB4728-20000.25MPa-4.0MPaDN300-DN3000Q235-A, B, C2016MnR2016Mn> -20 ° -200 °> -20 ° -350 ° Neck welded flange JB/T4703-2000JB4726-2000JB4728-20000.6MPa-6.4MPaDN300-DN200020R16MnR20R16Mn15CrMo16MnD09MnNID12Cr2MoI> -70 ° -450 °> -70 ° -260 °> -70 ° -400 °> -70 ° -450 ° pipeline Threaded flange sealing surface smooth pattern of standard H12-67, H21-67 Nominal pressure PN = 22-32MPa calibre DN = 10 ~ 150mm material carbon steel, alloy steel, stainless steel pipe welded flange plate-type sealing surface smooth surface, Trapezoidal groove of the standard JB/T81C94, HG20593-97, GB/T9113-2000 Nominal pressure PN = 0.25 ~ 2.5MPa calibre DN = 10 ~ 2000mm material carbon steel, alloy steel, stainless steel pipe welded steel flange sealing surface smooth pattern Face, Tuao face, trapezoidal groove of the standard JB/T9116-2000, HG20594-97, GB/T82-94, HG20595-97 Nominal pressure PN = 1.0 ~ 25MPa calibre DN = 10 ~ 2000mm material carbon steel, alloy steel, stainless steel Pipeline cover flange, blind-type sealing surface smooth surface, Tuao face, trapezoidal groove of the standard GB/T9123-2000, HG20601-97, JB/T86-94, H13-67 Nominal pressure PN = 0.25-32MPa calibre DN = 10 ~ 2000mm material carbon steel, alloy steel, stainless steel.

            China's steel flange system of national standards GB
            1) Nominal pressure: 0.25 Mpa ~ 42.0Mpa
            a, Series 1: PN1.0, PN1.6, PN2.0, PN5.0, PN10.0, PN15.0, PN25.0, PN42 (main series)
            b, Series 2: PN0.25, PN0.6, PN2.5, PN4.0
            One PN0.25, PN0.6, PN1.0, PN1.6, PN2.5, PN4.0 a total of six grades of flange size of a flange to Germany as the representative of the European flange system and the rest for USA and France Portland flange as the representative of the Inter-American system.
            In GB standards, the flange subordinate to the European System of Nominal pressure level for the largest 4 Mpa, flange subordinate to the Inter-American System of Nominal pressure level for the largest 42 Mpa.
            2) Nominal Path: 10 mm ~ 4000mm
            3) flange of the structure forms:
            The flange
            Unit flange
            a, threaded flange
            b, welding flanges welded flange
            With welded flange-neck with neck-Chengcha welded flange plate welded flange
            c, Central welded flange-song sets of cuffs neck-ring-song sets of welded flange plate welded flange-ring-song sets of plate flange plate sets of turn-flange
            d, covered flange (blind hole flange)
            4) flange sealing surface: flat, concave, convex surface, the tenon slot face, Central Link -

            International code: FLANGE flange,

            W / N FLANGE Drive with welded flange

            S / O FLANGE band Drive-welded flange

            BLIND FLANGE blind flange plate

            HS:73079100

             

             

             
            PRINT】 【BACK
             

             

            CSPIPEFITTING
            CSPIPEFITTING

            (HE BEI) WPHY CO.,LTD

            TEL/FAX: +86-317-6608591/6886591


            Email: Jerry@RockCrystal.com.cn


            QQ/WeChat: 527312202
            奇米网777四色首页